Rigging Hardware

Rigging hardware that matches the chain it hangs on

Most rigging failures traced back to hardware are not chain failures. They are a mismatched fitting, an uncontrolled repair, or a component with no traceable rating. TELEMAC supplies hardware in the same grade and from the same documented production as the chain we sell, so a replacement hook or connector link does not quietly downgrade an assembly that was rated as a system.

What we carry at launch

• Swivel hooks, 15 ton and 20 ton. For loads that need to rotate under load without transferring twist into the sling legs. Fitted with self-locking latches.
• Master links. Grade 100 master links and sub-master link assemblies, sized to the chain and leg count they carry.
• Connector links. Grade 100 coupling links for joining chain to fittings and for field repair of assemblies within the manufacturer's instructions.
• Clevis hooks, 1" and smaller. Grab, sling and self-locking hooks with a clevis pin attachment, across the common chain sizes from 1/4" through 1", so a hook can be matched to chain without an adapter stack.
• Swivel road plate lifting rings. Bolted or pinned to road plates and covers for a low-profile, flush pick point.
• Shackles. Screw-pin and bolt-type anchor shackles, sized on request.
• Wire rope clips. For wire rope terminations where a swaged fitting is not practical.

Buy the system, not the part

A sling assembly is rated as a system: the lowest-rated component sets the working load limit. That is easy to state and easy to break in the field, usually when a hook is replaced from a bin of unmarked spares. Two habits protect a fleet:

1. Buy replacement fittings in the same grade and rated capacity as the chain they attach to, and keep the certificate.
2. Retag the assembly whenever a component is replaced, so the tag still describes what is actually hanging on the hook.

We can supply retagging kits and replacement tags alongside hardware orders, ask on the quote.

Ratings, proof testing and documentation

Graded hardware is supplied with the working load limit permanently marked on the component, and shipments include the certificates referencing the production batch. Assemblies built by TELEMAC are proof-tested before shipment. As with all our lifting products, the documentation is supplied to support your obligations under O. Reg. 213/91 and the applicable ASME B30.26 and B30.9 standards, see Compliance.

Volume, dealers and private label

Rigging hardware is a repeat-purchase, price-sensitive category, which is exactly where direct sourcing shows up on an invoice. Dealers and rental fleets buying in volume should start with the Cost Comparison: send us your current purchase lines with product, specification, quantity and price, and we return a line-by-line comparison at your volume. Private-label packaging and dealer-branded tags are available on Custom Solutions.

Pricing

Prices display after sign-in on an approved account. Anyone can browse full specifications, add items to a quote and submit an RFQ; pricing comes back with your quote.